Washer Repair in Irving — Book a Visit Today

Water on the laundry floor gets your attention quick. So does a drum that fills and then just sits there. Common causes: a clogged drain pump, a worn door boot, a lid switch that stopped reporting, or a broken belt. Front-loaders in Irving homes also collect scale and detergent film in the lines, which slows draining over time. We repair top-load and front-load washers from every major maker. Shut the water valves behind the machine, then reach us or fill out the quote form with the error code on the display.

Real person answers
Open 7 days
Written quotes

Call (888) 857-9883

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Common washer faults in Irving homes

"It won't spin, and my clothes are soaking wet" Drive belt, motor coupler, lid switch, or a clogged drain keeping water in the tub.
"There's water all over the laundry room floor" Door boot seal, split hose, cracked pump housing, or an overflowing dispenser.
"It bangs and walks across the floor on spin" Worn tub bearing, broken suspension rods or shocks, or unlevel feet.
"The tub never fills, or fills forever" Inlet valve scaled shut, screens plugged with grit, or a failed pressure switch.
"It stops halfway and beeps at me" Control board fault, door lock switch, or a drain error the machine can't clear.

Irving coverage

We cover Irving from 75038 and 75039 through 75061 and 75062, plus nearby Grand Prairie, Carrollton, and the Dallas side of the line.

Other repairs we do in Irving

All washer repair → · All Irving services →

Washer Repair in Irving — quick answers

Is a washer that leaks worth repairing?

Usually yes. Most leaks trace to a hose, a door seal, or a pump housing, and those are replaceable parts. We find the source first, since a puddle can travel far from where it started before you see it.

Why does my water smell bad even after cleaning?

Front loaders trap gunk in the rubber boot folds and the dispenser drawer. Hard water minerals give that film something to cling to. We clean and inspect those areas and check whether the drain line is holding water.

Do you work on front load and top load washers?

Both, plus stacked laundry centers. We're an independent shop and service all major brands. Tell us the brand and roughly how old the machine is when you call us so we bring likely parts along.

How long does a washer repair take?

Many repairs finish in one visit. Pump, valve, belt, and switch work is straightforward. Bearings, boards, and some sealed-tub jobs need a part ordered, and we tell you that up front rather than after we open it.

How soon can you get to my house in Irving?

Most Irving calls get a slot same week, and often same day if you reach us early. We give you an arrival window instead of an all-day wait. Call us and tell us the appliance and the symptom so we can plan the route.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell, or see. Noise, leak, error code, burning odor. Give us the brand and rough age if you know them.
Step 2
We come look
A technician arrives with common parts on the truck. We test the machine instead of guessing. Then we explain what failed, in plain words, and what the repair takes before anything gets opened up.
Step 3
You decide, we repair
Nothing gets replaced without your go-ahead. Most repairs finish the same visit. If a part must be ordered, we tell you straight and set a return time that works for your day.

Call (888) 857-9883

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Hard water is our specialtyWest Texas scale wrecks dishwashers, ice makers, and water valves. We see it daily. Clogged spray arms, crusted heating elements, inlet screens choked white. We clean and replace the parts that scale eats first.
Built for Texas summersHeat pushes refrigerators and freezers hard. Condenser coils pack with dust, compressors run nonstop, garage freezers quit in triple digits. We check cooling systems for heat load, not just for the obvious broken part.
Plain talk, no runaroundWe tell you what died and why. If a machine is not worth fixing, we say so. You get the reasoning, not a sales pitch, so you can make the call yourself.
Most brands, most machinesWashers, dryers, ranges, ovens, dishwashers, fridges, freezers. We work as an independent shop on all major brands, top load and front load, gas and electric. One call covers the whole laundry room and kitchen.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.